- Maximum weather and dust protection for your wheelchair. Made from the “elephant hide” of outdoor fabrics, lightweight 400-denier nylon with poyurethane backing similar to leather or vinyl.
- High visibility reflective safety tape at 300 yards -a great safety feature during vehicle transport or travel.
- Simple application and removal featuring 1″ side quick release buckles and draw cord around base with Cord Lock along with sewn elastic band around base to secure footrests.
- Added security with 4 grommets at base for securing with bungee cords (not included). All vertical slits are reinforced with side release buckles.
- Easy storage of the wheelchair cover with an included stuff sack. Cover measures 38″ H x 7″ W x 44″ L and weighs just 1.2 pounds.
The Diestco manual wheel chair cover will protect your folding wheelchair or scooter from weather and dust during transport, travel or storage. Slip the cover over your wheelchair or mobility scooter and pull the elastic down under your chassis. Pull the chord lock so that it is tight around the bottom. For extra security, when transporting your vehicle on the back of your car or van, tie down the bottom by hooking bungee-type cords (not included) through the bottom belt loops. Slips easily over wheelchair hanging arm on a wheelchair lift. NOTE: The cover is not intended for highway use without using some securing device (i.e. rope or bungee cords) over the top of the cover. This will reduce the amount of excess room under the cover and prevent the cover from billowing up at high speeds. If your cover is flapping excessively at high speeds, the life of the cover will be greatly reduced.